Commissioning of an 800 t Servo Transfer Press

The coil is fed via a decoiler with a max. capacity of 7,5 t. A connected feed-straightening combination reduces the stresses in the material to be processes by means of alternating bends. A spray lubricator ensures a uniform lubrication of the strip material to minimize the wear of the tools during continuous operation. Boards are punched out in a 160 t ram press and transported under a specially developed conveyor system under the main ram. The machine table is designed for a max. tool length of 4.500 mm. Thanks to a 3-axis gripper system, the components are precisely positioned in the production stages with each stroke. An individual die cushion and ejector system provide further possibilities for forming.

Another highlight is the integrated tool changing system with a max. load capacity of 25 t. It consists of two separate, movable on rails tool tables. Thus, the new tool can be prepared during operation of the system on the shuttle table. As a result, standstill times for setup processes are reduced to a minimum.